| Infinity, the inventor of servo-controlled subwoofer systems, has adapted the technology developed for the finest home-audio loudspeakers to create BassLink, a groundbreaking automotive powered subwoofer. BassLink sets a new standard for in-vehicle bass reproduction. | |
| Four low-level inputs provide non-fading bass. Four high-level inputs also provide non-fading bass and the ability to easily interface BassLink with most factory sound systems. | |
| BassLink can be mounted vertically or horizontally thanks to its unique mounting system. Basslink provides user-adjustable input sensitivity, crossover frequency and bass-boost, allowing BassLink's performance to be optimized for any installation. | |
| BassLink features a 200W Class D subwoofer amplifier that provides all the horsepower needed to drive the 10" subwoofer/10" passive radiator combination. | |
| Power outpt: 200 watts RMS Class D Amplification | |
| Drivers: 10" woofer and 10" passive radiator | |
| Bass EQ Adjustment: +3dB to -6dB @ 45hz | |
| Variable Electronic Crossover: 50hz-100hz High Cut @ 12dB per octave slope | |
| Frequency Response: 20Hz-120Hz | |
| Input Sensitivity Line Level: 50mV to 4V | |
| Input Sensitivity Speaker Level: 1V to 16V | |
| Fuse Value: 25A | |
| Maximum Current Draw: 12A | |
| Quiescent Current Draw: less than 800mA | |
 reference series / 1220W 12" Subwoofer |
Specifications: Power Handling RMS: 300W Power Handling Peak: 1200W Frequency Response (± 3dB): 22Hz - 800Hz Sensitivity: 92dB Mounting Depth: 6-1/8" Impedance: 4 Ohms |
 reference series / 1020W 10" Subwoofer |
Specifications: Power Handling RMS: 250W Power Handling Peak: 1000W Sensitivity: 90dB Frequency Response (± 3dB): 22Hz - 800Hz Mounting Depth: 5-1/2" Impedance: 4 Ohms |
| Dual stacked magnets and bump backplate increase efficiency and provide additional clearance for long Xmax. | |
| Check out the downloadable and viewable Box and Parameter Sheet for additional info and suggested enclosures. | |
| A wopping 11.9 millimeter X-max delivers serious excursion. This subwoofer is great for both SPL and sound quality applications. | |
| Progressive spider offers better control at excursion limits than a linear spider | |
| Hi-Roll Rubber Surrounds offer superior cone edge suspension and reject moisture and UV. | |
| Nominal Impedance: 4 ohms | |
| Power Handling: 300WRMS/1200W peak | |
| Sensitivity @ 2.83V/1m: 92dB | |
| Frequency Response: 20Hz - 800Hz | |
| Mounting Depth: 6-1/8" (156mm) | |
| Cut-Out Diameter: 11-1/8" (283mm) | |
 kappa series / 80.1 8" Subwoofer |
|
| Gold-plated five-way binding posts are used to provide the best possible amplifier connection. | |
| For suggested enclosures check out the downloadable Box and Parameter Sheet. | |
| Configuration: 8" | |
| Power Handling: 100 w RMS | |
| Sensitivity: 93dB 2.83V/1m | |
| Frequency Response: 30 - 300Hz | |
| Co-Injection Molded Cones bond the cone to the surround during the molding process, eliminating the glue joint. | |
| Mounting Depth: 4" | |
| All Kappa subwoofers utilize a large flared and vented polepiece to facilitate voice coil cooling and minimize turbulence. | |
| Nominal Impedance: 4 ohms | |
| Fs (Hz): 49.21 | |
| Qts: 0.44 | |
| Vas (liters): 18.91 | |
| Xmax (mm): 3.5 | |
| Levc@1kHz (mH): 0.89 | |
|
kappa series / 120.1SE 12" Subwoofer |
|
| All Kappa subwoofers utilize a large flared and vented polepiece to facilitate voice coil cooling and minimize turbulence. | |
| Configuration: 12" | |
| Power Handling: 300W RMS | |
| Sensitivity: 94dB 2.83V/1m | |
| Frequency Response: 25 - 250Hz | |
| Co-Injection Molded Cones bond the cone to the surround during the molding process, eliminating the glue joint found on virtually all other brands. | |
| Mounting Depth: 5.82" | |
| Gold-plated five-way binding posts are used to provide the best possible amplifier connection. | |
| Nominal Impedance: 4 ohms | |
| This woofer has been optimized for small sealed and vented boxes and is ideal for sound quality applications. Check out the Box and Parameter Sheet for suggested enclosures. | |
| Fs (Hz): 22.52 | |
| Qts: 0.36 | |
| Vas (liters): 146.47 | |
| Xmax (mm): 11.24 | |
| Levc@1kHz (mH): 3.65 | |
|
|
| Configuration: 12" dual voice coil | |
| Power Handling: 250W RMS | |
| Sensitivity: 94dB 2.83V/1m | |
| Frequency Response: 25 - 250Hz | |
| Co-Injection Molded Cones bond the cone to the surround during the molding process, eliminating the glue joint found on virtually all other brands. | |
| Mounting Depth: 5.82" | |
| Gold-plated five-way binding posts are used to provide the best possible amplifier connection. | |
| All Kappa subwoofers utilize a large flared and vented polepiece to facilitate voice coil cooling and minimize turbulence. | |
| Nominal Impedance: 4 ohms | |
| This woofer has been optimized for small sealed and vented boxes and is ideal for sound quality applications. Check out the Box and Parameter Sheet for suggested enclosures. | |
| Fs (Hz): 23 | |
| Qts: 0.43 | |
| Vas (liters): 154.99 | |
| Xmax (mm): 9.5 | |
| Levc@1kHz (mH): 1.38 | |
|
kappa / 100.1SE 10" Subwoofer |
|
| All Kappa subwoofers utilize a large flared and vented polepiece to facilitate voice coil cooling and minimize turbulence. | |
| For suggested enclosures check out the downloadable Box and Parameter sheet | |
| Configuration: 10" | |
| Power Handling: 250W RMS | |
| Sensitivity: 93dB 2.83V/1m | |
| Frequency Response: 25 - 250 Hz | |
| Co-Injection Molded Cones bond the cone to the surround during the molding process, eliminating the glue joint. | |
| Mounting Depth: 5.07" | |
| Gold-plated five-way binding posts are used to provide the best possible amplifier connection. | |
| Nominal Impedance: 4 ohms | |
| Fs (Hz): 31.91 | |
| Qts: 0.41 | |
| Vas (liters): 50 | |
| Xmax (mm): 7.43 | |
| Levc@1kHz (mH): 2.43 | |
|
|
|||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||
|
|||||||||||||||||
